Standard Door Louvers
Search
Vision Frames / Lite Kits | Door Louvers | Glazing Products | Edges & Astragals  
       
AFDL
Non-Vision
Inverted “Y” Louver
MATERIAL:
Frame: 18 GA (1.2mm) Cold Rolled Steel
Blades: 22 GA (.75mm) Cold Rolled Steel
FINISH: Grey Primer, Beige or Bronze Enamel
INSTALLATION: Our top seller fastens the auxiliary frame to the louver core thru the door cutout, eliminating the need to drill holes in the door.
DOOR THICKNESS: 1-3/4" (44mm) is standard.
1-3/8" (35mm), 2" (51mm) and 2-1/8" (54mm) are available. Louver core may be offset.
AESTHETICS: Tight mitered corners, no visible welds, and countersunk mounting holes.
OPTIONAL FEATURES: Galvanized, Stainless Steel, Custom Baked Enamel Paint Colors, Insect or Bird Screen, Security Screws
 
Technical Data

Product Features
Attached Screens
Framed Screens
Screws for Door Louvers

Other Models Available

AFDL-T Transom Louver - Core Only
ADL Operating (Open/Close) “Z” Blade Louver
CHDL Non-Vision Inverted “V” Louver - Core Only
CHDL-1F Inverted “V” Non-Vision Louver - Louver Core,
Frame One Side
CHDL-2F Inverted “V” Non-Vision Louver - Louver Core,
Frame Both Sides


   
FLDL
Fire Rated
Fusible Link Louver
MATERIAL: 18 GA (1.2mm) Cold Rolled Steel
FINISH: Grey Primer, Beige or Bronze Enamel
INSTALLATION: Self attaching product fastens the auxiliary frame to the louver core, thru the door cutout, eliminating the need to drill holes in the door
DOOR THICKNESS: 1-3/4" (44mm) is standard. Also available up to 2-1/2" (64mm) door (to maintain fire rating).
AESTHETICS: Tight mitered corners, no visible welds, and countersunk mounting holes.
FIRE TESTED: with U.L. mark
20/45/60/90 minute: Approved Listing
max width 24", max height 24"
min width 12", min height 6"
Tested to: BS 476.22, Steel Doors - 120 min
OPTIONAL FEATURES: Galvanized, Stainless Steel, Custom Baked Enamel Paint Colors, Insect or Bird Screen, Security Screws
 
Technical Data
Installation Instructions
Fusible Link Removal / Reinstallation


 

 

   
FDLS
Non-Vision Inverted Split “Y” Louver
MATERIAL: 18 GA (1.2mm) Cold Rolled Steel
FINISH: Grey Primer, Beige or Bronze Enamel
INSTALLATION: Screws directly into each side of the door thru countersunk mounting holes.
DOOR THICKNESS: Any door thickness over
1-1/8" (29mm)
AESTHETICS: Tight mitered corners, no visible welds, and countersunk mounting holes.
OPTIONAL FEATURES: Galvanized, Stainless Steel, Custom Baked Enamel Paint Colors, Insect or Bird Screen, Security Screws
 
Technical Data

       

       
 
Standard
Door Louvers

Specialty
Door Louvers

Security
Door Louvers